About Sinodrills Industries We Serve
Minería
Cantera
Soporte en tierra
Exploración minera
Pozos de agua y perforación geotérmica
Our products mainly include 4 series
Our Products
-
Thread Button Bits
With the top quality of alloy steels imported from USA and the best carbides made in China, we produce all threaded button bits by hot press technology
Thread Button Bits > More -
Retract Thread Button Bits
With the top quality of alloy steels imported from USA and the best carbides made in China, we produce all retract threaded button bits by hot press technology.
Retract Thread Button Bits > More -
Threaded Cross Bits (X Bits)
Threaded cross bits or threaded X bits are usually used for very hard and abrasive rock formation.
Threaded Cross Bits (X Bits) > More -
Retract Thread Cross Bits
Retract thread cross bitRetract thread cross bits are usually used for very hard and abrasive rock formation.Thread size: R32, R35, R38, T38, T45, T51.Diameter: 38mm to 127mm.
Retract Thread Cross Bits > More -
Taper Drill Bits
Taper bits with carbide hot pressed on the bit skirts, tapered bits have a good drilling performance and are excellent in longevity.
Taper Drill Bits > More -
Reamer Tools
Reaming drilling tools are used when a large diameter is needed to be reamed out after a pilot holes is drilled to a depth
Reamer Tools > More -
Domed Button Bits
As a reaming drilling tools, domed button bits are used when a large diameter is needed to be reamed out after a pilot holes is drilled to a depth.
Domed Button Bits > More -
Coupling Sleeves
Both semi-bridge and full-bridge coupling sleeves are manufactured by SINODRILLS
Coupling Sleeves > More -
Shank Adapters
Shank adapters are used for transmitting power from the rock drill to the drill stems.
Shank Adapters > More -
Hexagonal Drill Rods
Hexagonal drill rods are produced by CNC machining and advanced heat treatment on the base of the same steels as Sandvik
Hexagonal Drill Rods > More -
Round Extension Drill Rods
Made from the same steels as Sandvik, produced by CNC machining and advanced heat treatment.
Round Extension Drill Rods > More -
Integral Drill Rods
Integral drill rods are ideal in small hole drilling, all integral drill rods consist of hex. rods with integrated cemented carbide chisel-shaped bit heads.
Integral Drill Rods > More -
Tapered Drill Rods
Tapered drill rod is a further development of the integral drill rods. It usually has a forged collar to maintain the proper shank striking face position in the rock drill.
Tapered Drill Rods > More -
Fully carburized taper drill rods
Fully-carburized Taper Drill Rod is to increase the surface carbon content of the drill rod through the carburization craft, level up the surface hardness and the overall strength, and increase the service life of the taper drill rod.
Fully carburized taper drill rods > More
-
DTH hammers
The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting
DTH hammers > More -
GSE DHD DTH Hammers
The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting
GSE DHD DTH Hammers > More -
GSE QL DTH Hammer
The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting
GSE QL DTH Hammer > More -
GSE SD DTH Hammer
The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting
GSE SD DTH Hammer > More -
GSE Mission DTH Hammer
The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting
GSE Mission DTH Hammer > More -
GSE DHD-N DTH Hammer
The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting
GSE DHD-N DTH Hammer > More -
GSE QL-N DTH Hammer
The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting
GSE QL-N DTH Hammer > More -
DTH bits
Sinodrills DTH bits are made of superior quality alloy steel which is made in U.S. Besides, all our DTH bits are using the premium T.C carbide which provides (the T.C buttons) for famous brand
DTH bits > More -
GSE DHD DTH Bit
Sinodrills DTH bits are made of superior quality alloy steel which is made in U.S. Besides, all our DHD DTH bits are using the premium T.C carbide which provides (the T.C buttons) for famous brand
GSE DHD DTH Bit > More -
GSE QL DTH Bit
Sinodrills DTH bits are made of superior quality alloy steel which is made in U.S. Besides, all our QL DTH bits are using the premium carbide which provides (the T.C buttons) for famous brand
GSE QL DTH Bit > More -
GSE Mission DTH Bit
Sinodrills DTH bits are made of superior quality alloy steel which is made in U.S. Besides, all our Mission DTH bits are using the premium T.C carbide which provides (the T.C buttons) for famous brand
GSE Mission DTH Bit > More -
GSE SD DTH Bit
Sinodrills DTH bits are made of superior quality alloy steel which is made in U.S. Besides, all our SD DTH bits are using the premium T.C carbide which provides (the T.C buttons) for famous brand.
GSE SD DTH Bit > More -
DTH Drill Pipes Standard
DTH drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability.
DTH Drill Pipes Standard > More -
GSE DTH Drill pipe Atlas Copco-Ingersoll Rand T4 IRT4
DTH drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability.
GSE DTH Drill pipe Atlas Copco-Ingersoll Rand T4 IRT4 > More -
GSE DTH Pipe Schramm Style
DTH drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability.
GSE DTH Pipe Schramm Style > More -
GSE DTH Pipe Atlas Copco Roc F6/L6/L8
DTH drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability.
GSE DTH Pipe Atlas Copco Roc F6/L6/L8 > More -
GSE DTH Drill pipe for SANDVIK/Driltech D25/D40K
DTH drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability.
GSE DTH Drill pipe for SANDVIK/Driltech D25/D40K > More -
DTH Adapter BOX to PIN
Adapters can be used to adapt drill rods with different types of thread, or connected to the drill powerhead to protect its thread.
DTH Adapter BOX to PIN > More -
DTH Adapter BOX to BOX PIN to PIN
Adapters can be used to adapt drill rods with different types of thread, or connected to the drill powerhead to protect its thread.
DTH Adapter BOX to BOX PIN to PIN > More -
Eccentric overburden casing drilling systems
Eccentric is the most economical solutions because its ingenious reaming wing the bit is retrievable can be used at the next hole
Eccentric overburden casing drilling systems > More -
Symmetric overburden casing drilling systems
Symmetric is a system comprised of an ingeniously simple concentric method of drilling through overburden with casing
Symmetric overburden casing drilling systems > More -
RC DTH Bit
The RC bits are the tool cutting rock. SINODRILLS RC DTH bits are made of superior quality alloy steel and T.C carbides.
RC DTH Bit > More -
RC DTH Hammer
The reverse circulation hammer is used to collect underground rock and mineral samples quickly and efficiently using a pneumatic rotary drill.
RC DTH Hammer > More
-
T thread Self Drilling Anchor Bars
The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling, anchoring and grouting in a single operation.
T thread Self Drilling Anchor Bars > More -
R thread Self Drilling Anchor Bars
The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling, anchoring and grouting in a single operation
R thread Self Drilling Anchor Bars > More -
Self Drilling Anchor Bits
Anchor bits is used as a sacrificial consumable for drilling hole
Self Drilling Anchor Bits > More -
Self Drilling Anchor Couplers
Self drilling Anchor coupler or called coupling sleeve, which is used to extend the anchor string
Self Drilling Anchor Couplers > More -
Self Drilling Anchor Hexagonal Nuts
Self drilling Anchor nut is used to lock the anchor system, make sure the anchor string is fastened with anchoring site
Self Drilling Anchor Hexagonal Nuts > More -
Self Drilling Anchor Spherical Nuts
Self drilling anchor nut is used to lock the anchor system, make sure the anchor string is fastened with anchoring site
Self Drilling Anchor Spherical Nuts > More -
Self Drilling Anchor Plates
The self drilling anchor plate transmits load force from the self-drilling anchor system to the work face.
Self Drilling Anchor Plates > More -
Self Drilling Anchor Adapters
Bits adapter used to connect between big diameter bits and smaller size anchor bar in anchor drilling
Self Drilling Anchor Adapters > More -
Self Drilling Anchor Centralizers
Self drilling anchor certralizer used to make sure anchoring hole is straight
Self Drilling Anchor Centralizers > More
-
2 wings air flush step drag bits
2 wings air flush step drag bits are one piece construction of alloy steel forged, with tungsten carbide cutting tips and gauge sides to ensure longer life
2 wings air flush step drag bits > More -
3 wings air flush step drag bits
3 wings air flush step drag bits are one piece construction of alloy steel forged or cast with Tungsten Carbide cutting tips and gauge sides to ensure longer life. This step drag bits have 3 wings and 9 air flushing holes.
3 wings air flush step drag bits > More -
3 wings air flush chevron drag bits
3 wings air flush chevron drag bits3 wings air flush chevron drag bits are one piece construction of alloy steel forged or cast with Tungsten Carbide cutting tips and gauge sides to ensure longer life
3 wings air flush chevron drag bits > More -
3 wings full flush step drag bits
3 wings full flush step drag bits are one piece construction of alloy steel forged or cast with Tungsten Carbide cutting tips and gauge sides to ensure longer life.
3 wings full flush step drag bits > More -
3 wings step drag bits
3 wings step drag bits3 wings step drag bits are one piece construction of alloy steel cast with tungsten carbide cutting tips and gauge sides to ensure longer life. It has 3 wings and 3 flushing holes. Compared with 4 wings, 3 wings step drag bits tend t
3 wings step drag bits > More -
3 wings chevron drag bits
3 wings chevron drag bits are one piece construction of alloy steel cast with tungsten carbide cutting tips and gauge sides to ensure longer life. I
3 wings chevron drag bits > More -
4 wings step drag bits
4 wings step drag bits4 wings step drag bits are one piece construction of alloy steel cast with tungsten carbide cutting tips and gauge sides to ensure longer life. It has4 wings and 4 flushing holes. 4 wings step drag bits, are more durable and lasting
4 wings step drag bits > More -
4 wings chevron drag bits
4 wings chevron drag bits4 wings chevron drag bits are one piece construction of alloy steel cast with tungsten carbide cutting tips and gauge sides to ensure longer life. It has 4 wings and 4 flushing holes. 4 wings chevron drag bits are more durable an
4 wings chevron drag bits > More -
Claw bits
Claw bitsClaw bit offers rapid penetration, drilling speed asfaster than that of a drag bit, and being as tough as a roller rock bit. They feature field replaceable bullet shaped cutters. Their cutters, which are economical, inexpensive and replaceable, a
Claw bits > More
Case Study
News
-
Sinodrills Equity Incentive Program Successfully Launched, Opening a New Chapter of Win-Win
Time:2024-07-17 18:23:06
Recently, Sinodrills launched the equity incentive project, and the first phase of the implementation plan has been successfully implemented and completed. A total of 1 million virtual shares were granted to 9 incentive objects. This milestone marks a maj
More
-
Expanding Overseas Markets: SINODRILLS Trademark Successfully Registered in the UK
Time:2024-07-05 16:07:18
Our own trademark “SINODRILLS” has been officially registered in the UK after nearly a year of preparation, review, and publication. This significant milestone marks notable progress in SINODRILLS' strategy to build a globally recognized brand and holds g
More
-
SINODRILLS Awarded Euromonitor Certification
Time:2024-05-24 17:48:10
Recently, we received authoritative certification from Euromonitor International. According to the latest research results from Euromonitor, SINODRILLS has been certified as China’s Leading Exporter of Rock Drilling Tools. This prestigious honor reaffirms
More
-
Grand Opening of SINODRILL's Renovated Office, Inviting All Customers to Visit
Time:2024-05-22 19:25:22
We are delighted to announce that after months of meticulous planning and construction, SINODRILLS has completed a comprehensive renovation of our office environment. This is not only a significant milestone in the history of SINODRILLS but also a solid s
More
-
Saluting SINODRILLS' female employees with warm regards delivered home
Time:2024-03-08 16:40:54
As International Women's Day approaches, SINODRILLS extends sincere blessings and gratitude to all female employees and the female relatives of all staff members. Despite the ongoing office renovations, with all employees currently working in temporary le
More